Hot Mix Asphalt: Mix Design: Marshall Method
1. Kandhal, P.S., and W.S. Koehler. Marshall Mix Design Method: Current Practices. Proceedings, Association of Asphalt Paving Technologists, Vol. 54, 1985, pp. 284-303.

2. White, T.D. Marshall Procedures for Design and Quality Control of Asphalt Mixtures. Proceedings, Association of Asphalt Paving Technologist, Vol. 54, 1985, pp. 265-284.

3. Foster, C.R. Development of Marshall Procedures for Designing Asphalt Paving Mixtures. NAPA IS84, National Asphalt Pavement Association, 1982.

4. Mix Design Methods for Asphalt Concrete and Other Hot Mix Types. MS-2, The Asphalt Institute, May 1984.

5. Mix Design Techniques - Part I. NAPA TAS-14, Instructors Manual, National Asphalt Pavement Association, April 1982.

6. Foster, C.R. The Effect of Voids in Mineral Aggregates on Pavement Performance. NAPA IS96, National Asphalt Pavement Association, 1986.

Hot Mix Asphalt: Mix Design: Moisture Susceptibility
1. Tunnicliff, D.G., and R.E. Root. Testing Asphalt Concrete for Effectiveness of Antistripping Additives. Proceedings, Association of Asphalt Paving Technologist, Volume 52, 1983, pp. 535-560.

Hot Mix Asphalt: Mix Design: Skid Resistance
1. Standard Specifications for Highway Construction. State of Alabama Highway Department, Montgomery, AL, 1985.

Hot Mix Asphalt: Mix Design: Weight Volume Relationships
1. Finn, F.N., and J.A. Epps. Compaction of Hot Mix Asphalt Concrete. TTI Research Report 214-21, Texas Transportation Institute, Texas A & M University, College Station, TX, August 1980.

2. Mix Design Methods for Asphalt Concrete and Other Hot Mix Types. MS-2, The Asphalt Institute, May 1984.

Hot Mix Asphalt: Mix Design: Mix Segregation
1. Brock, J.D. Hot Mix Asphalt Segregation: Causes and Cures. National Asphalt Pavement Association, Quality Improvement Series-110/86, 1986.