Gencor Industries, Inc., is the leading manufacturer of asphalt plants, soil remediation plants, combustion systems and screening equipment for the road and highway construction industry. Gencor Industries leads the industry with some of the most respected and recognized names. Bituma, General Combustion (Genco), HyWay, and H&B (Hetherington & Berner) have earned their reputation with over 100 years of quality and integrity. Each company, a leader in its field, is dedicated to producing cutting edge technology and the highest quality equipment to highway contractors.

Asphalt Storage Tanks

Hy-Way™ asphalt and polymer tanks are the most energy-efficient tanks available for today''s complex liquid storage requirements. All Hy-Way™ coil tanks feature the highest quality materials and construction for durability and maximum heat retention. Hy-Way™ tanks are available in vertical, horizontal or portable, configurations and capacities from 1,000 to 50,000 gallons.

Standard features:
Large heat exchange coil surface.
Serpentine and helical coil designs for adequate expansion and contraction.
Four inches of high quality fiberglass insulation maintain optimum operating temperature.
Safety suction system prevents the liquid level from dropping below the heating coil, yet allows complete emptying of the tank.
Internal vent and overflow system to prevent overfilling and condensing vapors from collecting in the insulation during truck unloading.

--------------------------------------------------------------------------------
VERTICAL TANKS
Hy-Way™ vertical storage tanks are a space saving alternative to conventional tanks and provide a higher efficiency alternative for polymer blend and emulsified liquids. Each tank comes equipped with a unique, twin helical spiral coil for maximum heat release into the product. In some special applications an optional electric low-watt density coil can be added for extra heat transfer.

Constructed of heavy quarter-inch plate, every Hy-Way™ vertical tank features a standard OSHA approved caged ladder and twenty-inch manhole access to the top of the tank. Diamond plate top deck construction surrounded by a safety railing with kick plate provide a sturdy access platform. A secondary access is located at the base of the tank and a cable level indicator is mounted externally along with an electronic temperature controller. The unique bolt-on "tip-top" bottom design of the vertical tank allows easy transport and installation with the use of a single crane.

All tank controls and piping are completely accessible at grade and include " inlet and outlet flanges and safety level cut-off switches.

--------------------------------------------------------------------------------

horizontal tanks

Hy-Way™ Horizontal tanks feature a high-efficiency, close-wound, serpentine coil for increased oil circulation and better heat transfer. Quarter-inch butt-welded steel plate forms the rugged shell construction of the tank with four inches of fiberglass insulation on the shell to reduce conductive heat loss. A series of integral saddles mounted on heavy twin twenty-five pound beams form the support frame which is easily set to grade or adaptable to concrete foundations. To ensure all-weather protection and durability, the Hy-Way™ coil tank is beautifully finished in a durable, scratch resistant, eighteen gauge embossed aluminum skin.

--------------------------------------------------------------------------------

portable tank

Hy-Way™ engineers the ultimate combination of heavy, rugged design and ease of transport for portable storage tank applications requiring high mobility.

A highly efficient two-inch, close-wound serpentine coil provides increased oil circulation and heat transfer for the most viscous of materials. For rugged dependability and transport, every Hy-Way™ portable tank is constructed on twin twelve-inch beams with tandem or triple axle configurations. The optional portability package includes a pre-piped and mounted unloading and metering pump system, unloading pipe carrier, swing down support jacks, fuel tank and a gooseneck mounted thermal oil heater. The exclusive Hy-Way™ "hard hat" design provides a mechanical walkway support to maintain the integrity of the insulation and allow access to the manhole and optional agitators.

For maximum heat retention, a thick blanket of fiberglass insulation and eighteen gauge embossed aluminum cover the entire shell and heads.

--------------------------------------------------------------------------------

additive tanks

For efficiency and convenience, the Hy-Way™ additive metering system is an all inclusive, skid mounted unit. Each additive system is equipped with piping that runs from tank to pump; from pump to three-way valve; and from three-way valve back to the tank.

The storage tank has four inches of insulation and is fitted with either an electrical heating unit or a thermal fluid heating unit. Both the electrical heating unit and the thermal fluid heating unit contain automatic temperature control. The standard liquid storage capacity for the additive metering system ranges from 1,000 to 2,000 gallons.

--------------------------------------------------------------------------------

calibration tanks

 The Hy-Way™ AC Calibration tank is a vertical 1,000 gallon coiled weight system. The unit is mounted on three (3) 5,000 lbs load cells which in turn are mounted on a platform. The Platform scale has a remote digital indicator graduated in 5 lb. increments. The tank is insulated with 4" of high efficiency firm fibeglass. The insulation is covered with 18 ga. embossed aluminum covered with clear acrylic to maintain its luster. The AC calibra?tion tank has an 20" manway on top which can be accessed via a tank mounted alumi?num ladder. Features include two (2) test weight platforms that can be folded up for travel, discharge ports 3" butterfly valve and SOW control cable. Available in skid-mounted or portable configurations.