The Terex RS600C is used in cold-mix reclamation, soil stabilization and mining applications, with hundreds of units proving their worth every day in the field. The center-mounted, V-belt-driven cutter maximizes weight and horsepower in the cut. Operation is bidirectional. And 4-wheel-drive steering makes this one highly maneuverable machine.
 
Features:

Hydraulic power-up end slides with independent control for right and left sides
Positive displacement lube system which provides lubrication of the lower drive shaft to seal cutter bearing and planetary seal boot
Automatic electric grease pump provides centralized lubrication of the rotating member seals whenever the cutter is engaged
Modular operator station swivels forward to rearward, 180 degrees, providing excellent visibility of the work area in either direction
Highly-visible systems gauges and controls

Specifics:

61,880 lb (29,068 kg) machine weight
600 hp (448 kW) Caterpillar® C16 DIT ATAAC diesel engine
Cutter system:
96 in (2,438 mm) width
16 in (406 mm) depth
102 rpm, low cutter speed
131 rpm, second cutter speed
163 rpm, third cutter speed
200 rpm, fourth cutter speed
Working Speed:
0 – 120 ft/min (0 – 36.6 m/min), low
0 – 247 ft/min (0 – 75.3 m/min), high
Travel Speed:
0 – 6.6 mph (0 – 10.6 km/hr)

For detailed information about this machine, please visit http://www.terexrb.com/pdf/RS600C.pdf for downloads.