# Modern Drum Mix Technology.
# Produces High Production Rate.
# Easy Operation And Less Maintenance.
# Designed For The International Market.
# Easy to Operate.
# Less Fuel Consumption.
# Fully Automatic Computerized Control Panel Board
# Accuracy In Quality Control.
# Portable Of Stationary.
# Low Dust Emissions.
# Proper Drying And Homogeneous Mixing Of Aggregate.
# Modular Design For Containerized Transport.
# Proper Asphalt Coating And Saving.

Asphalt Drum Mixing Plant - 35 TPH to 200 TPH 
Specifications:
FOUR BIN FEEDER UNIT
The hoppers have been properly designed with slopes, allowing a constant discharge without bridge forming.
The first bin meant for the small size aggregate or dust is fitted with vibratory motor to ensure the free flow.
Each hopper is equipped with an adjustable opening door that determines the discharge quantity for the materials capacity in outlet, as a function of specific weight of materials.
ASPHALT TANK UNIT
Fully insulated double walled tank is equipped with separate high pressure electronic burner for heating the Asphalt and control unit capable of metering and spraying required quantity of bitumen at specified temperature.
The Positive displacement jacketed Asphalt pump coupled with reduction gearbox and variable speed motor is provided with hot oil circulating system.
All the Asphalt carrying pipelines are hot oil jacketed and thoroughly insulated with asbestos tape.
VIBRATING SCREEN
A single-deck vibrating screen is provided on the slinger conveyor conveyor to remove oversize aggregates received from the 4-bin feeder.
SLINGER CONVEYOR
An inclined conveyor with 500mm wide belt mounted on idlers receives aggregate From the gathering conveyor and feeds in to the dryer.
An inclined conveyor with 500mm wid
* The dryer drum is fabricated to ensure proper heating of aggregates with minimum heat loss

Features:
LOAD OUT HOT MIX MATERIAL CONVEYOR
Mixed hot material taken out from mixer drum is carried by inclined hot conveyor belt & discharged into the Tipper/Truck through automatic hydraulic surge storage storages hopper.
The surge storage hopper of approximately 350 to 1000 kgs is provided at the discharge end of the conveyor.
The surge storage hopper is hydraulically actuated, for opening and closing hopper door and scrapper plate to scrape out the mixed material sticking to the conveyor.
DUST COLLECTOR
The dust collection system consists of enclosed multiple cyclones, exhaust fan and chimney. Augers are provided to remove dust from the dust collection chamber.
MINERAL FILLER
Fabricated from steel plates, it feeds the required quantity of additives to the pug mill.
CONTROL CABIN
A fully automatic Control Panel is provided for controling the quantity and quality of production with operator sitting in Air-conditioned comfort.
MISCELLANEOUS
All component used are of top quality, with I.S.I. Certification wherever available.