DESCRIPTION: RoadChem™309® is a specially engineered emulsifier used in the manufacture of high performance microsurfacing emulsions and quick set slurry emulsions. It improves the mix characteristics with a range of additives allowing lower emulsifier and water levels, even for difficult aggregates. RoadChem™309® systems are rapid curing and setting with the additional advantage of also being quick to traffic. RoadChem™309® is proven to give excellent mix set and cure characteristics on a very wide range of aggregate chemistry. RoadChem™309® is compatible with most Russian, Asian and Arabian crude based bitumen. Mix designs should always be carried out with any aggregate/bitumen system to ensure optimal performance.
BENEFITS:
Mix Control Rapid Cure No segregation Excellent adhesion & stone coating High Stability Can be used with aluminum chloride, aluminum sulfate, surfactant, and cement additivies
PHYSICAL PROPERTIES: Viscosity at 25C: 7400cp Viscosity at 60C: 550cp Flash point: >200C Specific gravity: 0.95 @ 25C Storage: Store in a cool dry place, do not let the temperature exceed 120°F (50°C). Use open drums first. Storage life: 12 months minimum (If stored correctly). Packaging: Supplied in steel drums (309 kg) or in 1 tonne totes.
APPLICATION: RoadChem™309® is suitable for use in slurry and microsurfacing systems where rapid cure is required. RoadChem™309® is an amidoamine type emulsifier. RoadChem™309® is compatible with a wide range of polymer modification types, including Neoprene, SBR, EVA and SBS.
TYPICAL FORMULATION: All formulations should be tested in the laboratory before use.
CQS Soap solution: RoadChem™309® 1.2 - 1.4% Hydrochloric acid: Adjust to required pH 2.0-2.5 Latex: 2.5 - 3.0% Water: Adjust to 100% Asphalt: 60 - 65%
MICROSURFACING Soap solution: RoadChem™309® 1.3 - 1.5% Hydrochloric acid: Adjust to required pH 1.5 - 2.0 Latex: 2.5 - 3.0% Water: Adjust to 100% Asphalt: 60 - 65%
RoadChem™309®: RoadChem™309® may be used in combination with other Roadchem chemicals in for tailored mixtures
SAFETY: A Material Safety Data Sheet is available for this product. Always read the safety data sheet for any chemical prior to use. RoadChem™309® is NON hazardous and not controlled by DOT.
|