Terex CR662RM RoadMix MTV
The 50,800-pound Terex/Cedarapids CR662RM RoadMix switches from material transfer vehicle to paver in a matter of hours.

• 16.7-ton receiving hopper
• Remix Anti-Segregation System with two sets of two counter-rotating augers that reblend 100 percent of the asphalt
• Rubber-track drive system with Smarttrac self-tensioning track system
• Outboard drive spreading augers and a new generation Remix System
  Terex CR662RM RoadMix MTV

Hamm HD 70 HV/ 70K Asphalt Compactors
With an operating weight of 15,212 pounds, the HD 70 HV is a 59-inch-wide double-drum, articulated configuration with a 62.5-inch offet working width.

• 17,100 pounds of centrifugal force
• 80-hp output
• 8-mph travel speed
• HD 70K is a combination model with four pneumatic tires mounted across the rear

            Hamm HD 70 HV/ 70K Asphalt Compactors

Ingersoll Rand/Blaw-Knox Wheeled Pavers
Ingersoll Rand and Blaw-Knox offer a line of wheeled pavers that are capable of placing bituminous base, binder and surface course mixes, and cement- or lime-stabilized sub-base aggregate materials.

• Models include PF-3200, PF-3172, PF-2181, PF-161 and PF-150
• Standard, independent, hydrostatic drive system
• 7- to 14-ton capacity hoppers
• 107- to 184-hp Cummins "Elite" Series diesel engines; PF-150 powered by 47-hp Deutz diesel engine
• 6- to 12-foot-wide mats; various screed choices available
  Ingersoll Rand/Blaw-Knox Wheeled Pavers

Roadtec RP 195 Asphalt Paver
The RP 195 is a 10-foot-wide rubber-track paver designed to work in all types of subgrades and paving applications.

• Improved track system provides large footprint
• Rubber-coated oscillating front bogies provide even pressure along track footprint
• Sauer-Danfoss 90 series hydraulic pump

         Roadtec RP 195 Asphalt Paver

Sakai GW750 Roller
The GW750 vibratory rubber-tired roller is suitable for tender mix Superpave applications, stiff HMA mixes and SMA.

• Develops an equivalent of up to 55,000 pounds of compaction effort in a 20,000-pound package with a 77-inch rolling width
• Pavement integrator achieves compaction from top to bottom of a typical HMA lift
• Multi-amplitude eccentric weights in front and rear axles
• Hydrostatically driven axles
• Articulated steering system 

                    Sakai GW750 Roller   

Bomag 814-2 Mid-Size Paver
The Bomag 814-2 mid-size class, self-propelled asphalt paver features the UNIMAT 2 screed assembly with an 8- to 14-foot standard paving width.

• Hydraulically controlled screed extensions
• 85-hp water-cooled Cummins turbo diesel engine
• Load-sensing hydrualic system
• Paving speeds up to 180 fpm; travel speeds up to 360 fpm
• Paving depths ranging from zero to 6 inches
• Screed can be crowned or inverted up to 2 inches and is equipped with a vibrator and propane heaters

LeeBoy 420 Pneumatic Roller
LeeBoy’s 420 nine-wheel pneumatic roller features a 2.5-ton static weight.

• 81-gallon pressurized water system
• Automatic low-pressure brake
• Hydrostatic transmission; up to 7 mph

Stone WolfPac 6100 Asphalt Roller
This 47-inch-wide, double-drum drive, vibratory asphalt roller is suited for road applications, as well as confined area compaction.

• Vibration can be directed to both drums or the front or rear drum only via an electro-hydraulic circuit combined with a custom-designed manifold
• 6,518 pounds of impact force
• 33.5-hp Kubota diesel engine
• Centerpoint articulation
• Pressurized water system with 47.5-gallon reinforced polyethylene tank

Caterpillar CB-564D Asphalt Compactor
The CB-564D features a 3054C turbocharged engine.

• Versa Vibe vibratory system
• Multi-position operating station
• Water spray system
• 27,783-pound operating weight
• 84-inch drum width

TransTech Notched Wedge Joint Maker
The Notched Wedge Joint Maker is an adjustable device that mounts on the end of any paver screed to shape the edge of the mat.

• Improves durability of longitudinal joint once the adjacent joint is laid
• Provides a clearly defined beveled edge that easily interlocks with adjacent lane
• Adjustable on site and on the run by the screed operator

Midland SP-6 Road Widener
The SP-6 self-propelled Road Widener spreads materials up to 6 feet next to the roadway.

• 8-foot 6-inch width and 15-foot length for transport without permits
• 2.5-cubic-yard fold-up hopper with a 15-inch variable-speed roller chain-driven conveyor
• Modular blade for variable spread width of 1 to 6 feet with optional hydraulic extension of 1 to 2 feet
• 49-hp John Deere Tier II turbo diesel engine
• 8-mph travel speed and ground speed of up to 150 fpm

Gehl 1648/1448 Pavers
These Power Box asphalt pavers are designed for all kinds of commercial and municipal applications.

• Two, fully adjustable screed options
• 4- to 13-foot paving widths
• 4-foot 9-inch to 5-foot 5-inch wall height for better operator visibility
• 1648 has the option of attaching material augers to the extensions
• 41-hp Isuzu water-cooled engine

Dynapac Tandem Asphalt Rollers
The CC222 HF/232 HF tandem asphalt rollers feature a high vibration frequency with low amplitude.

• 18,520- and 20,065-pound maximum operating weight
• 20,060/15,800 pounds of centrifugal force per drum at high/low amplitude
• 82-hp Deutz air-cooled turbo diesel engines
• Split drums reduce the risk of cracks in asphalt on sharp curves
• Also features a large water tank, sprinkler timer and large fuel tank